EasyManua.ls Logo

ZAZU Pam the penguin SLEEPTRANIER User Manual

ZAZU Pam the penguin SLEEPTRANIER
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MANUAL HANDLEIDING GUIDE
D’UTILISATION
BEDIENUNGS
ANLEITUNG
SELECT YOU LANGUAGE
Pam the penguin
SLEEPTRANIER
WITH NIGHTLIGHT AND WIRELESS SPEAKER
Question and Answer IconNeed help?

Do you have a question about the ZAZU Pam the penguin SLEEPTRANIER and is the answer not in the manual?

ZAZU Pam the penguin SLEEPTRANIER Specifications

General IconGeneral
BrandZAZU
ModelPam the penguin SLEEPTRANIER
CategoryFitness Equipment
LanguageEnglish

Summary

How the Sleeptrainer Works

Time to Sleep

Use Pam as a comforting nightlight, choosing your own colour. It can be lit all night or auto shut off after 60 mins.

Just a Little Longer

Pam automatically lights up orange 30 mins before wake-up time, signaling it's almost time to get up.

OK to Get Up Time

Pam automatically turns green at the preset time, indicating it is OK to get out of bed.

Understanding the Buttons

A ON/OFF SWITCH

Press to switch on, choose nightlight colour, and adjust brightness by holding the button.

B TIME

Press for 3 seconds to set the time. Press once to confirm hours/minutes.

C OK TO GET-UP TIME

Press for 3 seconds to set the OK to get-up time. Press once to confirm hours/minutes.

D SETTING

Use this button to change hours and minutes when digits are blinking.

D SLEEPTRAINING ON/OFF

Press for 3 seconds to switch sleeptraining mode on or off.

B BLUETOOTH ON/OFF

Press B and D simultaneously for 3 seconds to switch Bluetooth on or off.

B 60 MIN. AUTO SHUT-OFF

Press B and C simultaneously for 3 seconds to activate 60-minute auto shut-off for light/speaker.

Initial Setup and Usage

1st Time Use: Switch On and Set Time

Charge Pam, press A to switch on, then use D and B to set the current time.

Use as Sleeptrainer

Set the 'OK to Get Up' time and ensure Pam is in sleeptrainer mode for automatic colour changes.

Use the Nightlight

Press button A to turn on the nightlight and cycle through colours for a comforting glow.

Advanced Features and Settings

Use as Nightlight Only

Set the sleeptraining OFF symbol via button D to use Pam solely as a nightlight.

Play Music via Wireless Speaker

Connect the speaker by pressing B and D, then find and connect to 'ZAZU-PAM' on your device.

Light and Sound Settings

Configure 60-minute auto shut-off, select colours via button A, and adjust brightness by holding A.

Power Supply and Charging

Pam uses a rechargeable battery. Charge on the base via USB. The battery icon blinks when low.

Safety Information

Includes important notes on product compliance, handling, keeping away from children, and cleaning instructions.