Printer Setup and Operation
Load the Media—Peel-Off Mode (with our without Liner Take-Up)
28
P1106464-001 ZT411/ZT421 Color Touch User Guide 5/9/19
5. Complete this step only if you want to use Peel-Off mode with Liner Take-Up. Your
printer must have the Liner Take-Up option or the Rewind option installed. Follow the
instructions for your printer option. If you are not using Liner Take-Up, continue with
step 6.
5-a. Thread the liner into the slot below the peel assembly.
Rewind Option Liner Take-Up Option
5-b. Feed the liner under the media
alignment roller (
1).
Slide the liner into the slot in the liner
take-up spindle (1).
To Next Page
Loading...