Zebra HC100 - Printer Status Indicator

61331M Platen Roller Assembly Maintenance Kit
Reposition the Printhead Assembly
36
61311L-001 Rev. A HC100 Maintenance Manual 5/8/08
2. See Figure 13. Lift the printhead assembly up and pull it forward ensuring the snap tabs
underneath the printhead assembly are disengaged from the printer.
Figure 13 • Closeup of Printhead Assembly Parts
3. Stand the printhead assembly up and back against the upper cover. It will stay in this
position until moved.
1
Metal printhead lever plate
2
Underside of printhead assembly
3
Snap tabs (2)
4
Chassis slots (2)
5
Media chute
1
2
3
3
4
4
5