Zebra HC100 - Page 37

37
61331M Platen Roller Assembly Maintenance Kit
Remove the Platen Roller
5/8/08 HC100 Maintenance Manual 61311L-001 Rev. A
Remove the Platen Roller
1. See Figure 14. To unlock the platen roller, rotate the green platen release tabs until they
are in a vertical position.
Figure 14 • Platen Roller Locked in Place
(Release tabs shown in locked position)
2. See Figure 15. Pull both of the platen release tabs straight up.
Figure 15 • Platen Roller Unlocked
(Release tabs shown in unlocked position)
1
Platen release tabs (2)
1
Platen release tabs (2)
1
1