Zebra PS20 - Charging the PS20; Charging Cradles and Cables; Charging Temperature Guidelines; Releasing the PS20 from Charging Cradles

PS20 Personal Shopper Quick Start Guide
11
Charging the PS20
Use one of the following accessories to charge the PS20.
1. To charge the battery, connect the charging accessory to the appropriate power source.
2. Insert the PS20 into a cradle. The PS20 turns on and begins charging.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or cradle always performs battery charging
in a safe and intelligent manner. At higher temperatures (e.g. approximately +37°C (+98°F)) the device or cradle may for
small periods of time alternately enable and disable battery charging to keep the battery at acceptable temperatures. The
device and cradle indicates when charging is disabled due to abnormal temperatures via its LED.
Releasing the PS20 from the Charging Cradles
Use one of the following methods to release the PS20 from the charging cradles:
• Software Release Using the Menu
• Software Release Using the Cradle Utility
• Manual Release using a Release Key.
Software Release Using the Menu
The PS20 cradles contain a locking mechanism that locks the PS20 inside the cradle when docked. The PS20 releases
from the cradle when a software command is received from the system.
Table 7 Charging Cradles
Description Part Number
Cables
DC
Cable
Interconnect
Cable
Extension
Cable
Single Slot Cradle CRD-MC18-1SLOT-01 CBL-DC-394A1-01
CBL-DC-393A1-02
CBL-DC-392A1-02
25-66431-01R
25-66430-01R
_____
High Density (HD) Three Slot Cradle
(Locking)
CRD-MC18-3SLCKH-01 CBL-DC-394A1-01
CBL-DC-393A1-02
CBL-DC-392A1-02
25-66431-01R
25-66430-01R
CBL-MC18-
EXINT1-01
High Density (HD) Three Slot Cradle
(Non-Locking)
CRD-MC18-SLOTH-01 CBL-DC-394A1-01
CBL-DC-393A1-02
CBL-DC-392A1-02
25-66431-01R
25-66430-01R
CBL-MC18-
EXINT1-01
Super High Density (HD) Three Slot
Cradle (Locking)
CRD-MC18-3SLCKS-01 CBL-DC-394A1-01
CBL-DC-393A1-02
CBL-DC-392A1-02
25-66431-01R
25-66430-01R
CBL-MC18-
EXINT1-01
NOTE Ensure that you follow the guidelines for battery safety described in the PS20 Product Reference Guide.