© 2017 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All rights reserved.
Reduce camera image blur on low light conditions
Fixed an issue where when both Ethernet and WiFi was active, ethernet was not getting the
high priority over WiFi for network traffic.
Added localized User Guide for Chinese language for TC25.
The finger touch cannot be detected easier with screen protector when conductivity is low
Fixed "Install" option is grayed out when user tries to install any third-party apps from file
browser.
Fixed an issue where camera preview resolution was set to 640x480
Added Localized User Guide for Chinese language for TC20
LED Notification added when battery charging error is seen
Fixed issue where a battery charging indicator (lightning) is disabled upon reaching 100%
capacity
Fixed DUT is not booting up when device is rebooted after disabling settings app using
AppMgr
Known Issues and Workarounds
Chromium browser has an issue where printer icon will disappear while trying to share a
page by clicking the browser menu (3 dots) and selecting share, if the device is suspended
before the action is performed. As a work-around press back-button and revisit the same
page and perform the action again and it will show the printer icon again.
For customers utilizing China Mobile as a carrier. Please be informed that the 3 in 1 nano
SIM card thickness is .81mm which will be damaged upon removal when using the TC25.
Zebra recommends that the customer asks China Mobile for a nano SIM card with a
thickness from .67mm - .76mm.
As per Android Compatibility Definition Document, user data needs to get wiped either
through a factory reset or an enterprise reset when an Enterprise Mobility Management
Agent enrolled to a device as a Device Administrator needs to get migrated to Device Owner
mode.
Last Revised: 12-11-2017
To Previous Page
Loading...
Need help?
General
