Zeiss Humphrey II-i series - To Change Test Parameters

Test Parameters and Strategies
Humphrey Field Analyzer II- i series User Manual 2660021145640 A
4-2
Figure 4.1 The Screening Test Parameter Setup Screen
To Change Test Parameters
You can access the parameter setup screen in two ways:
• From the Start Test screen, using CHANGE PARAMETERS.
• From the Test in Progress and Pause screen. Note that during testing, you can change only test
speed an
d fixation monitoring.
1Start at the Parameter Setup screen. Depending on whether you
selected a Screening or Threshold test, you either will open the
Screening Parameter Setup screen (Figure 4.1) or the Threshold
Parameter screen (illustrated to the left of this text). Select the
para
meter you wish to change in either the screening or the threshold
screen.