Testing
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
5-14
When you save the test by pressing YES or the test is saved automatically after changing patient data,
the HFA II-
i
will save the test results first to the hard drive, then to a USB storage device if you have
the Save to USB Option turned on (see “Save to USB Option,” on page 2-20).
Figure 5.5 Do You Wish to Save this Test?
You can also set up your instrument to automatically transmit exams when saving (see “Using the
Save/Transmit Option,” on page 14-33 and “Setting Up Save/Transmit for EMR/PMS/DICOM
Systems,” on page 14-41). If you have set the Save/Transmit Option to Save and Transmit, then the
dialog at the end of the test will look a little different (Figure 5.6).
Figure 5.6 Do You Wish to Save and Transmit this Test?
Note: If you have purchased and licensed DICOM Gateway 2.0, you can automatically export raw
exam data at the end of an exam by enabling the END OF TEST EXAM DATA EXPORT option on the
DICOM Gateway Services screen (see “Enable/Disable DICOM Gateway Services:,” on page H-4).
To Next Page
Loading...
