Guided Progression Analysis (GPA)
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
8-32
•GPA Summary
You may also simultaneously print one of three GPA-specific reports:
•GPA Summary
• Full GPA
• GPA Last Three Follow-up
Note: If you select GPA Summary in both the single-page reports drop-down and the GPA reports
dr
op-down, it will be printed only once.
At this time you also have the option to print any of the following non-GPA reports:
•Overview
• Change Analysis
• Three-In-One
To begin printing immediately without modifying the
GP
A Baseline and Follow-up selections, you
may press
PRINT ALL SELECTED ITEMS.
Step 3: Modify the GPA Exam Selection (Optional)
If you selected any GPA report in Step 2, the
EXAM SELECTION button will be available (Figure 8.14).
If not, the
EXAM SELECTION button will be grayed out. If you wish to change the Baseline selection or
change which exams are selected for inclusion in the analysis, press
EXAM SELECTION to display the
Exam Selection – GPA screen (Figure 8.15).
Figure 8.15 Exam Selection – GPA Screen
GPA makes default selections of Baseline (*) and Follow-up (>) exams. Exams with too many false
positives (>15%) are marked with an exclamation point (!) and are not available for inclusion in the
GPA analysis. See “Permitted Baseline–Follow-Up Configurations for GPA,” on page 8-12 and
“Default Baseline Selection Rules,” on page 8-12 for more information on automatic default
Baseline selection.
To Next Page
Loading...
