Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
File Functions
10-21
Patient B: This patient is about to be transferred to the local HFA database and has
the same Name and Date of Birth as Patient A, but does not have a Patient ID (i.e.
field is blank). When Patient B is copied, transferred, retrieved from an archive, or
restored from a backup to the local HFA database, Patient B will automatically be
assigned the same Patient ID and Issuer of ID as Patient A, and Patient B will be
merged with Patient A.
Transferring Tests from the HFA I to the HFA II-
i
Transferring results between the HFA I and HFA II-
i
is done via serial cable using the TRANSFER
TESTS function.
There are certain limitations to which tests will transfer from the HFA I to the HFA II-
i
. A name and
date of birth must be included on the original HFA I test in order to transfer it to the HFA II-
i
. The
transfer process will not warn you of improperly labeled HFA I tests or test results which are not
eligible to be transferred. The following is a list of restrictions specific to the test type being
transferred:
Threshold
• Fast Threshold or Master files will not transfer
• Compared, Averaged or Merged tests will not transfer
• Tests originally acquired on the HFA II-
i
(and transferred back from the HFA I) will not transfer
The Macula test: Only the first two threshold values at each poin
t will be displayed and printed.
Note: The Peripheral 30/60-2 test on the HFA I is the Peripheral 60-4 on the HFA II-
i
. The test results
will transfer, but the 4 points not found in the 60-4 pattern will not be included.
Screening
All screening tests will transfer from the HFA I to HFA II-
i
except:
• The C-166 Screening test
• A screening test where the user selected the Central or Peripheral Reference Level
• Auto Diagnostic tests
Note: The Peripheral 68 test on the HFA I is the P-60 on the HFA II-
i
. These test results will transfer,
but the 8 points not found in the P-60 pattern will not be included.
Custom
Custom Arc and Profile tests will not transfer.
Kinetic
Kinetic test results cannot be transferred from the HFA I.
To Next Page
Loading...
