Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Database Management
11-19
6While the rebuild utility is running, the screen displays a user
message.
7If the utility successfully rebuilds the database, the screen displays
a user message. Press OK.
Copy to your hard drive any test results stored to the USB storage
device since the hard disk failure.
8If the rebuild utility is unsuccessful, the screen displays a user
message.
Choose the desired button.
RETRY r
epeats the rebuild process. Occasionally, a second try is suc-
cessful.
DELETE initializes the database. All data on the Hard Disk will be
deleted. You will need to restore the database from a USB storage
device, a network file server, or floppy disks as described on the fol-
lowing pages.
CANCEL attempts to return the HFA II-
i
to its previous condition. Use the “USB Only” method of data
storage until you find a more convenient time to deal with the failed database. When time permits,
you will need to restore the database from a USB storage device, floppy disks, or the network file
server, as is described on the following pages.
To Next Page
Loading...
