Custom Testing
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
12-6
6The Custom screen will appear.
Your chosen Point Pattern, Field Size, and P
oint Spacing are indicated
in the lower, right-hand corner of the screen.
Note: Custom tests are automatically generated for the right
eye only. When the left eye is tested, the HFA II-
i
will flip the test
pattern to accommodate for the mirrored physiological differences. Do
not attempt to design a left eye Custom test.
Adding Single Points
1 If you chose the Single Point (X, Y) option, you may now input the individual points to be
tested. Press the ADD ENTRY button.
2For a Single Point entry, you must enter the (X, Y) coordinate values
(as whole numbers) of each point you wish to test.
Input the “X” value of the point. Press ENTER.
To Next Page
Loading...
