Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Custom Testing
12-13
5If YES, input up to 12 characters for the test name. The word
“Threshold” or “Screening” will appear after the test name on the
button.
You will not be able to change the name of the test after the ENTER
button
is pressed. Therefore, be sure to check the name.
Press ENTER.
Note: The name of the Custom test button will also be printed
as part of the title on the printouts for your Custom test.
6Custom test buttons are added automatically down the first column
of the Custom Tests screen. When five tests have been added, the next
test buttons will be added to the right-hand column. Screening tests
will always appear before threshold tests.
Note: Your Custom test buttons may be added to the Main
Me
nu screen. See “Altering the Main Menu Screen,” on page 2-26, for
details.
At this point, we highly recommend that you perform a Configuration
Backup to back up your Custom test patterns to a USB storage device.
See “Configuration Back Up and Restore,” on page 11-5, for instruc-
tions.
Deleting Custom Tests
1Press the
SYSTEM SETUP
icon from the Main Menu screen.
To Next Page
Loading...
Need help?
General
