Zeiss Humphrey II-i series - Page 296

Kinetic Testing
Humphrey Field Analyzer II- i series User Manual 2660021145640 A
13-20
3Select the Kinetic test to run.
4Press STEP BY STEP.
Next you will need to select the eye t
o test. The Patient Data screen
appears. Press PROCEED, once you have entered all desired patient
data.
5Press TEST MERIDIAN to begin the first stimulus. The meridian to
be tested is indicated on the screen.
The stimulus will light but not move for a short period of time. You will
then see a diamond representing the stimulus begin to move across
the screen.
Note: You can use the ZOOM TO 30/EXPAND TO 80 button to
change the stimulus starting point prior to starting each stimulus.