Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Kinetic Testing
13-53
13You will be given the option to use the same points you chose
for the first isopter to be applied to this second isopter.
Add the meridians to be tested, as pr
eviously described for the second
isopter. Repeat the sequence for as many isopters (up to 10) as
desired.
Erasing a Meridian
1You can remove a meridian by pressing the ERASE LAST MERIDIAN
button.
2The gray box moves back one meridian and the indicator at the top
changes to the previous meridian. You can press the ERASE LAST
MERIDIAN button repeatedly to erase previously programmed
meridians. It will change to ERASE ISOPTER when all meridians have
been deleted from the current isopter.
To Next Page
Loading...
