Zeiss Humphrey II-i series - Naming the Test Button; Saving the Custom Test

Kinetic Testing
Humphrey Field Analyzer II- i series User Manual 2660021145640 A
13-54
Saving the Custom Test

1When you have created all of your desired isopters, you must save
the Custom Kinetic test. Press the SAVE TEST button.
2You will see this pop-up window verifying that you have entered all
the isopters and points for this Custom Kinetic test. If you desire to
add more isopters or meridians to be tested, press NO. If you are ready
to save your Custom Kinetic test, press YES.
Naming the Test Button
1You will have the opportunity to name the Custom Test you just
created. Press YES.
Note: If you press NO, the name of your test will automatically
be entered as “Custom Kinetic”. Should you use the same approach
for naming a second Custom Kinetic test, it also will be named
“Custom Kinetic.” To avoid the confusion that might be caused by two
different tests having the same name, we recommend that you give
each Custom Kinetic test its own unique name.