Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Kinetic Testing
13-55
2The Keyboard will appear. You will be able to type up to 12
characters, including spaces, to give a unique name to your Custom
Kinetic test. The word “Kinetic” will automatically be added at the end
of your text. That way, you do not need to use the word Kinetic as part
of your 12 character description.
Press ENTER when the name of your test is complete.
Deleting Existing Kinetic Tests
You may find that you wish to add more Custom Kinetic
tests than the Kinetic test menu has room
for. Or, you may wish to delete existing tests you do not plan to use. You can delete any of the
buttons on the Kinetic Test menu, using the following process:
1 From the Main Menu screen, press the
SYSTEM SETUP
icon. Next press ADDITIONAL SETUP.
Press CUSTOM TEST.
2 Press DELETE KINETIC TEST.
3 Choose the test you wish to delete by pressing the appropriate button. Confirm that this is your
intention.
Note: The “BG/FS Kinetic” test was created specifically for use in Germany
. The test is identical to
the “Standard 30” kinetic test. A user in another country may wish to delete this test.
All three of the pre-defined kinetic test patterns are limited
to presenting only one isopter. You may
wish to create your own Custom kinetic test using the same meridians as any of these tests, with the
added flexibility of being able to plot multiple isopters, as desired. You then could delete the
original, single-
i
sopter sequence from the menu.
Be careful not to delete the top button on the menu: the MANUAL KINETIC TEST
. Should you
accidently delete this button, reloading the software will restore the manual kinetic ability to your
HFA II-
i
.
Remember, if you plan to use certain tests fr
om the Kinetic menu often, we recommend that you
create a new button on the Main Menu. Further explanation is provided in “Altering the Main Menu
Screen,” on page 2-26.
To Next Page
Loading...
