Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Kinetic Testing
13-61
Final Verification
Run the new SSA Aphakic Kinetic test. Print the Numerical Va
lues printout. Verify the meridians (0,
45, 90, 135, 180, 225, 270, 315,), the stimulus (IV4E) and the test speed (4 degrees/sec.) are as
shown in this example. The order of the meridians presented is not significant. If the meridians listed
in your test are not identical to those specified, you must delete the test and create a new one.
Deleting the Test
If the SSA Aphakic Test is determined to be incorrect, you must delet
e it. Follow these steps:
1 From the Main Menu screen, press the
SYSTEM SETUP
icon.
2 Next press ADDITIONAL SETUP>CUSTOM TEST>DELETE KINETIC TEST.
3 Choose the SSA Aphakic test as the test that you wish to delete, by pressing the appropriate
button. Confirm that this is your intention.
To Next Page
Loading...
