Networking
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
14-40
Specifying Your Practice’s Issuer of ID
1From the Main Menu screen, select the
SYTSTEM SETUP
icon.
2Press PERSONALIZED ID.
3Press ISSUER OF ID.
4Input up to a total of 64 Issuer of ID characters and spaces from
the pop-up keyboard. You can use any character found on your
keyboard. Pressing the CAPS key will allow you to switch between
upper and lower case letters. Press ENTER, and then DONE. You will
automatically be returned to the System Setup screen.
Exporting
HFA-NET Pro or the DICOM Gateway software allows
export of exam
data from the HFA II-
i
to an
EMR/PMS/DICOM system. Once you have licensed HFA-NET Pro, and purchased and installed an
EMR system or a PMS, see “Setting Up Exporting to Non-DICOM EMR/
PMS Systems and DICOM
Systems using DICOM Gateway 1.0,” on page I-22 to set up the EMR/PMS Export feature. DICOM
Gateway 2.0 exports exam data and/or a re
port (a DICOM formatted Encapsulated PDF) to a DICOM
archive, such as FORUM.
Note: Exporting exams to a DICOM Archive can only be done from the hard drive. If you want to
export exams contained on a floppy disk or USB storage device to a DICOM Archive, use Copy Tests to
copy them to the hard drive first.
Importing Work Lists
With HFA-NET Pro, your HFA II-
i
allows retrieval of patient demographic information from a work list
generated by a non-DICOM EMR/PMS system. The DICOM Gateway (1.0 or 2.0) allows retrieval of
patient demographic information from a work list generated by a DICOM system. Electronic medical
To Next Page
Loading...
