Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
EasyConnect RCT 1.0
G-7
The RCT displays a message alerting you there will be a delay before proceeding (Figure G.5).
Figure G.5 Please Wait Message
Note: If all your HFA instruments cannot respond fast enough you will receive a message such as
“No instruments are responding. Please try again later” or “Could not retrieve instrument
configuration data. Please try again later.”
If at least one HFA instrument responds, you will not
receive a message. If you receive one of these messages, select the Back button until you see the
EasyConnect
RCT Welcome screen, and then run the RCT again.
To Next Page
Loading...
