Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
DICOM Gateway 2.0 (Optional)
H-5
•STORAGE COMMITMENT
Enable this service if you wish to perform a st
orage commitment request. The DICOM
storage commitment service is used to confirm that exam data has been permanently stored
by the DICOM Storage Provider.
•WORK LIST
Enable this service to use the D
ICOM
Gateway 2.0 work list (see “Importing Work Lists from
DICOM Systems using DICOM G
ateway 2.0,” on page 14-48). If HFA-NET Pro is activated
and this service is disabled, the HFA-NET Pro (CZM
-XML via FEP) or DICOM Gateway 1.0
work list will be used (see “Importing Work Lists from Non-DICOM EM
R/PMS Systems and
DICOM Systems using DICOM Gatew
ay 1.0,” on page 14-45).
Perform Test Connections:
13Select TEST CONNECTIONS to display the Connection Tests screen (Figure H.3).
Figure H.3 Connection Tests Screen
The date, time, and status of the last connection test is displayed. To perform a test, click a test
button. Select DONE to return to the DICOM Gateway Setup screen.
•DICOM GATEWAY
Perform this connection test to the DICOM Gateway computer.
• MWL PROVIDER
Perform this connection test to the MWL Provider server set in the DICOM Gateway
2.0
softwar
e.
•STORAGE PROVIDER
Perform this connection test to the Storage Pr
ovider
server set in the DICOM Gateway 2.0
software.
To Next Page
Loading...
Need help?
General
