Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Networking Reference
I-5
3 Select HFA NETWORK SETUP on the Communications Setup menu (Figure I.4).
Figure I.4 Communications Setup Screen
HFA Network: Setting Up Link-Local
Link-Local is the default network configuration. Link-Local assigns
a unique IP address to the HFA
without searching the local network. Link-Local does not require a DHCP server. If you wish to use
Link-Local, follow this procedure to set it up.
1 From the HFA Network Setup screen, select LINK-LOCAL from the OBTAIN HFA IP
CONFIGURATION drop-down box (see Figure I.5).
Figure I.5 HFA Network Setup Screen – Link-Local
2 The HFA will be assigned an IP address, subnet mask, and default gateway.
3 You now need to enter your Workgroup or Domain name. You can do so by pressing the
WORKGROUP NAME button. Note: In order to use a Shared Folder, you must enter a
Workgroup Name.
To Next Page
Loading...
