Networking Reference
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
I-26
• ASK BEFORE PRINT
Choose this selection if you wish to be asked for the print destination each time you en
ter a
print command.
•EXPORT IMAGE FILE
Choose this selection if you wish to transmit a TIFF or PDF image file o
f selected pri
ntouts to
the file server.
• EXPORT IMAGE FILE AND PRINT
Choose this selection if you wish to export a TIFF
or PDF image
file, as well as to print out a
paper copy.
Figure I.31 Print Destination: and Export To: Drop-Down Buttons
4 If you selected “Ask before Print”, “Export Image File” or “Export Image File and Print”, select
the EXPORT TO: drop-down button and select your desired destination as either DATA EXPORT
HOST, EMR/PMS HOST, DICOM ARCHIVE, or FLOPPY DISK.
Note: The Data Export Host or EMR/PMS Host options will only appear on the
list if you have
registered the HFA-NET Pro software on your HFA II-
i
. The DICOM Archive option is only available if
you have licensed and registered the DICOM Gateway 2.0 software on your HFA II-
i
. Refer to
Chapter (14), "Networking," for further details regarding these network features.
5 If you selected an image file destination in the previous step, select the EXPORT OPTIONS
button to display the Export Options screen shown below.
Note: The Export Options screen will not be displayed if you selected D
ICOM Archive from the
EXPORT TO: drop-down list. The image format for the DICOM Archive is always set to Encapsulated
PDF—a DICOM formatted PDF file transmitted via DICOM protocols.
To Next Page
Loading...
