General Operation
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
2-18
2Select the down arrow of the Save/Transmit Option drop-down box
to open the list shown in the illustration to the left of this step. Choose
one of the following options:
Save Only -
Saves your completed exam to the
hard drive at the end of
testing when you prompt to save. This will also save your completed
exam data to a USB storage device if the Save to USB option is on (it is
on by default), and a USB storage device is present or inserted into a
USB port at the time the test ends.
Save and Transmit - Save
s your completed exam to the hard drive and
transmits the exam data at the end of a test to the “Transfer
Destination” you specify in Step 3. This will also save your completed
exam data to a USB storage device if the Save to USB option is on (it is
on by default), and a USB storage device is present or inserted into a
USB port at the time the test ends.
Note: Automatic saving at end of test to a floppy disk is no longer available. Use Copy Te
sts to save
tests to a floppy disk with an optional USB floppy disk drive.
Chapter (10), "File Functions," has additional details on serial transfer of data between the various models of the HFA. Refer to Chapter (14),
"Networking," for further details about networking on the HFA II-
i
.
To Next Page
Loading...
