ZelHer P20 - Pairing to 2 Devices

6
between blue and red, indicating that it is in
pairing mode.
2. Activate the Bluetooth search feature on your
phone; refer to your phone’s manual for further
instructions.
3. Select P20 from the searched device listing.
4. Enter pin code “0000” to conrm the nish
pairing. The headset will ash just blue to
indicate the completed pairing.
5. When pairing is complete the headset will stop
ashing between blue and red, and the phone
will prompt you to Connect to the headset enter
Yes on the phone to connect to the headset, when
connected the blue light will ash
Pairing to 2 Devices:
This headset contains a duel-link function for
connecting with 2 mobile phones simultaneously.
Pair the rst phone following the steps above.
1. Pair the rst phone following the steps above.
2. Temporarily turn off the rst connected phone’s
Bluetooth wireless technology function.