Need help?Do you have a question about the Zephir ZFS9107M and is the answer not in the manual?
Secure the mounting plate to the ceiling for fan support.
Connect the fan to AC power with the main switch off.
Thread wires through the down rod after disassembly.
Combine down rod, motor housing, and top cap.
Properly connect the electrical wire terminals.
Fix the top cap and set the down rod position.
Attach the fan blades to the motor unit.
Install the lamp with specified bulb wattage.
Mount the glass lamp cover onto the fixture.
Controls fan speed and power off using the pull chain.
Adjust fan speed using the regulator knob.
Operate the slide switch for fan direction.
Warranty covers 2 years from the purchase date.
Details user rights and common warranty exclusions.
To Next Page
General
