What to do if no air is coming out of my Zepter Therapy Air iOn PWC-570 Air Cleaner?
First, ensure the Zepter Air Cleaner is plugged into a 220-240 V power socket. Then, press the POWER button to turn on the appliance, followed by pressing the MODE button to select an operational mode. This should start the airflow. If not, try again after ensuring a secure connection to the electricity supply.
Why does my Zepter Therapy Air iOn PWC-570 air flow speed not change?
The airflow speed on your Zepter Air Cleaner might not be changeable because the unit is in automatic operational mode (Normal) or quiet night mode (Normal). In these modes, the speed is automatically controlled.
What to do if my Zepter Therapy Air iOn PWC-570 Air Cleaner emits an unpleasant odour?
If your Zepter Air Cleaner is emitting an unpleasant odour, you should check if the filters have been cleaned and replaced. Regular filter maintenance can prevent unpleasant smells.
Why is the operation speed too low on my Zepter Air Cleaner?
If the operation speed of your Zepter Air Cleaner seems too low, a likely cause is that the filters need attention. Check if the filters have been cleaned and replaced to ensure optimal performance.
What to do if the particle sensor does not alter on my Zepter Therapy Air iOn PWC-570?
To address a particle sensor that isn't changing on your Zepter Air Cleaner, clean the lens following the provided instructions. Additionally, try reducing or increasing the sensor sensitivity as described in the instructions.
General| Brand | Zepter |
|---|---|
| Model | Therapy Air iOn PWC-570 |
| Category | Air Cleaner |
| Language | English |
Covers essential safety rules for handling the appliance, including water avoidance, dry handling, and placement.
Details electrical safety, usage by children, and precautions regarding environment like oily sprays, smoke, and sunlight.
Recommends proper disposal of the appliance at the end of its life cycle.
Lists the items included in the product packaging, such as the main device, remote control, and filters.
Provides a visual breakdown of the front and rear components of the Therapy Air device.
Explains the different modes and functions like Speed, Mode, and Mood Light.
Details the function of various indicator lights for speed, mode, and air quality.
Guides on how to operate the appliance in automatic and manual modes.
Explains the role of the negative ion generator in purifying air.
Details the different filters (Antistatic, Antibacterial, HEPA, etc.) and their specific purification roles.
Instructions for initial setup, including filter preparation and installation.
Covers automatic operation, manual mode, quiet night mode, and air pollution sensor adjustment.
Provides step-by-step instructions for cleaning the device casing, sensors, and inlets/outlets.
Details the process for cleaning the pre-electrostatic filter.
Outlines the filters that require regular replacement and their frequencies.
Step-by-step instructions for replacing the various filters in the device.
Guidance on how to mount the appliance on a wall, including positioning and precautions.
Lists key technical specifications such as power, noise level, air flow, and dimensions.
Explains the meaning of various labels and symbols found on the device.
Provides solutions for common operational problems encountered with the appliance.
States that the product complies with CE marking and relevant standards.
Outlines the terms, conditions, and exclusions of the product's 5-year limited warranty.
To Next Page