3
Attention:
It is normal for the bubble machine to produce less bubbles when
using battery power than when plugged in with the power adapter.
Note:
• Keep the air intake ports free from blockage.
• Do not use outdoors in the rain as this may lead to a short circuit.
• Do not leave unused liquid in the reservoir for an extended period.
The liquid may thicken in the reservoir. Remove all liquid before
storing or moving.
• If the bubble machine is to be mounted using a bracket, please note
the machine should only be inclined to a maximum angle of 15
degrees.
• The bubble machine should not be used for more than 8 hours
consecutively and is best operated at 40º-90ºF (4º-32ºC).
Performance of the machine may be reduced in low temperatures.
Cleaning
1. Empty all bubble liquid from the machine.
2. Rinse and drain the reservoir using a little distilled water.
3. Add some warm distilled water to the maximum level.
4. After adding water, turn on the bubble machine and allow it to run
in a well-ventilated area until all wands appear to be free of residue.
5. Drain the remaining water to complete cleaning.
Note:
• It is recommend to clean the bubble machine after every 40 hours of
operation.
• Do not spin the fan using compressed air to avoid damage.
• Always remove the power adapter from the socket before refilling
the liquid or cleaning the bubble machine.
To Next Page
Loading...
Need help?
Power
Performance
Weight and Dimensions