JesterML Operating Manual Glossary
66 of 73 73-406-00 Issue 2.0
Size X/Y
The X and Y size of a Movement Effect. The X and Y size of a Movement Effect are
controlled by the wheels when the appropriate POSITION wheel group is selected for
a fixture with Pan & Tilt. Setting one of these to 0 on an Ellipse effect creates a
horizontal or vertical line.
Slider
See Fader.
Snap
A fade which happens instantly.
Solo
A channel is at full intensity (subject to the Grand Master) and all other intensity
channels are turned off. This is a temporary action generally associated with a flash
button.
Sound2Lite
The ability to control lights in time to a beat. The JesterML has a sound2lite input
which listens to the input music and, according to the settings of the chase, changes
the lights in time to the beat.
Special Button
This turns the Multi-Function-Keys and Wheels into controls for fades. In RUN Mode,
the Flash Mode setting is also here.
Speed
Chase speed is controlled by the wheels when CHASES is selected.
Movement Effect speed is controlled by the wheels when the appropriate POSITION
wheel group is selected for a fixture with Pan & Tilt.
Stack
See Playback.
Start Address
Fixtures occupy a block of DMX channels, beginning at the Start Address. The
number of channels in the block depends on the fixture type – which is defined in the
fixture personality information loaded from the Fixture Library.
Store
The function of the PROGRAM/GO button when the desk is in Wide preset mode.
The button is coloured YELLOW and toggles between A FADERS B STORED and B
FADERS A STORED.
Submaster
Often abbreviated to simply Sub, this is a scene or a chase stored on a fader for
instant access when replaying a show. Submasters are available on all JesterML
To Next Page
Loading...
Need help?
General
