ZERO GRAVITY RK7801 - Post-Massage Procedures; Process after Massage; Cleaning and Maintenance

On/off
Timing
M
echanical
Massage
P
ressure
Massage
Z
ERO-G
Stop
S
houlder
W
aist
I
ntensity
F
atigue
recovery
Pain
relieving
Comfortable
mood
Demo
Auto
Custom
Returning...Bodydetecting...
O
verall
S
houlder
B
ack
Waist
Point
Width
Speed
3D
S
trength
V
olume
●
1
●
2
●
3
●
1
●
2
●
3
●
1
●
2
●
3
※
●
2
●
4
●
4
●
1
●
2
●
3
●
1
●
2
●
1
5
5
1
2
3
4
6
7
remotecontrol
23 24
Process after massage
Massage chair restoration
Make sure no people, pets and other things in the
back and leg reclining areas.
Using remote control to restore the chair to
original position.(or pressing “on/off” key directly
to restore the chair.)
Or
After restoration, put the remote control back to
the bracket.
Putting the pillow, cushion to original position.
Turnofftheswitch
Unplugtheplugfromoutlet.
(Note: When unplug the power, holding the plug
position as picture, not catch wire. )
Cleaningthechair.
Caution
After massage, pressing “on/off” key to turn
off the chair and waiting for the restoration..
After using the chair, please make sure you
unplug the power, to avoid damage to kids
and pet.
After using the chair, turn off the power switch
and unplug the plug.
Don’t pull on the wire.
Avoid the injury caused by water, dust, covered
wire perished
Cleaning and maintenance
PU
Plastic parts
Normal cleaning
Using dry and soft cloth to clean.
Don’t use chemical, medical
cleanser to clean chair.
If PU is dirty
Using soft cloth to dip 3-5% neutral cleanser
mild water solution to press the PU to clean.
Washing the cloth carefully and clean the
cleanser.
UsingdryclothtowipethePU
LetthePUdriedbyitself.
(Don’tusedriertodriedthePU)
Fabric
Using soft cloth to dip neutral cleanser
water solution to wipe the fabric.
Don’t use diluter,
alcohol or petrol
to clean.
Using soft brush to dip neutral
cleanser to clean the very dirty place.
Don’t brush too much, or it may ruins
fabric.
Washing the cloth carefully and clean
the fabric.
Letthefabricdriedbyitself.
Using soft cloth to dip neutral cleanser
water solution to wipe the chair.
Washing cloth carefully and
wringing out to wipe the chair.
Letitdriedbyitself.
Cleaning remote control
Wringing out the cloth and wipe the remote
control.
Dryingbyitself
Don’t use alcohol, diluter to clean.
Cleaning
U
nplug the power before cleaning, don’tuse
wet hands to touch plug.
After cleaning, do dried your hands if you want to
insert the plug into outlet.
If you don’t operate as the manual, it will cause
electric shock or burn.
On/off
On/off
Operation
M
a
i
n
t
e
n
a
n
c
e
●
1
●
3