Connecting Cable
3. Power Up
A power cord and an adapter are provided in the accessory box.
Plug the round end of the adapter power cord into the power input of ZERO
AC input condition
• Nominal Voltage Range: 100 – 240 VAC
• Maximum Voltage Range: 90 – 264 VAC
• Nominal Frequency: 50 / 60 Hz
• Maximum Frequency Range: 47 – 63 Hz
NOTE
Run First Time Installation
Step 1. Language Selection
Step 2. Conguring Satellite Connection
Welcome.
This start wizard will guide you through the basic setup of your STB.
Press the OK button on your remote control to move to the next step.
English
German
Catalan
Croatian
Please use the UP and DOWN keys to select your language.
Afterwards press the OK button.
7
To Next Page
Loading...
Need help?
General