Miami Swing Assembly Instructions
Requires 2 person assembly. All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit,
Socket Set, Hammer.
Miami Swing Pack List
Item Description Quantity
A1 Front Leg 2
A2 Back Leg (with additional bolt hole for canopy) 2
B Beam 1
C Horizontal Short Brace 2
D Horizontal Long Brace 2
E Diagonal Brace 2
F Seat Back 1
G Seat 1
H Armrest Support 2
J Armrest 2
K Shelf 2
L Canopy Slats 1
M Slats Support 2
N Centre Batten 1
Fixings
30mm Screws 16
60mm Screws 34
100mm Screws 2
45mm Bolts, washers & nuts 6
100mm Bolts, washers & nuts 24
115mm Eye Bolts & small karabiner, washers & nuts 4
150mm Bolts, washers & nuts 2
150mm Eye Bolts & large karabiner, washers & nuts 2
700mm Chain 2
900mm Chain 2
www.zest4leisure.co.uk
To Next Page
Loading...