225
SCHEDULED TECHNICAL MAINTENANCE
EMPLOYED OPERATING LIQUIDS AND CHARGES Z 8641 - Z 11741
Purpose Type of charge Amount if liters
Cooling liquid
Z 8641 - Z 9641 see tab. 8 19,5
Z 10641 - Z 11441 see tab. 8 23,5
Z 11741 see tab. 9 19
Fuel see tab. 7 180
Engine oil
Z 8641 - Z 11441 see tab. 1 10
Z 11741 see tab. 1 15
Gearbox and final drive oil see tab. 2
52 •
Front driving axle housing oil see tab. 3 6,5
Front driving axle planetary reducer oil see tab. 3 2 x 0,6
Front P.T.O shaft gearbox oil see tab. 2 1,2
Brake fluid see tab. 6 0,5
Hydrostatic steering oil dle tab. 4 2,7
Seat (MARS) sprung suspension damper Buffer oil 0,07
• - These are the standard amount of oil in the gearbox and final drive. Depending on type of tractor operation (on
slopes, falt terrain and the like) the amount of transmission oil should be increased (see chapter Hydraulic system;
section Take-off amount of oil from the external outlets of the hydraulic system of this Operating and maintenance in-
structions). For the first filling it is necessary, in addition, to count with the increased amount of oil to the gearbox and
final drive by approx. 4l of oil.
To Next Page
Loading...
