Zetor 10641 Forterra turbo - Attaching the Carried Implements, Eventually Weights of Front Three Point Hitch; Driving with Agricultural Machines Attached in Front Three Point Hitch; Mechanical Lock of Front Three Point Hitch

140
HITCHES
F 203 F 204 F 205
ATTACHING THE CARRIED IMPLE-
MENTS, EVENTUALLY WEIGHTS OF
FRONT THREE POINT HITCH
The implement is attached into the front
three point hitch forks and is locked by
pins.
A -
pins in upper position “ swing of
implement is assured ± 8
B - pins in lower position “ when
transporting in hilly terrain or on the
road, eventually with attached
ballast weights. Vertical position of
pins locks the pins. Pins can be
removed after turning by 90
o
to
horizontal position.
MECHANICAL LOCK OF FRONT
THREE POINT HITCH
Mechanical lock of front three point hitch
is carried out by means of lock pins (1)
and double opening support welded on
lower links (2). Front three point hitch is
locked in max. upper position. Trans-
versal tube of front three point hitch
support serves for fixing the upper end
of implement springs. Springs unload the
front attached agricultural implement.
DRIVING WITH AGRICULTURAL MA-
CHINES ATTACHED IN FRONT THREE
POINT HITCH
Reduce the travel speed of tractor when
going with agricultural machines
attached in the front three point hitch to
20 km/h. We recommend to drive with
engaged front driving axle at 4WD
tractors which are not equipped with
cardan brake.
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz