Zetor 10641 Forterra turbo - Max. Liquid Weight Depending Upon Tire Size

160
FILLING LIQUID INTO TIRES
MAX. LIQUID WEIGHT DEPENDING UPON TIRE SIZE
Tire size Filling 75%
Clear water
(l), (kg)
Solution of calcium chloride
CaCl
2
(kg) water (l)
Additional
load (kg)
16,9-34 250 108 166
274
16,9-38 290 126 192
318
18,4-34 330 144 218
362
18,4R-38 385 168 254
422
480/70R38 335 146 222
368
18,4-38 385 168 254
422
520/70R38 390 170 258
428
Values mentioned in table are for temperature of freeze - 30°C.
Preparation of liquid:
1. Dry calcium chloride CaCl
2
is added into water, never the other way!
2. Liquid is not dangerous, but it must be handled carefully. Wash the spilt liquid drops with clean water.
3. Let the liquid cool down before filling. Keep the prescribed quantity of hydrated lime.
4. Liquid must not get into contact with metal parts and with electrical installation. Tube valve is liquid resistant.
5. Antifreeze liquid prepared in this consistency must not be used in cooling system.
6. Remove the antifreeze as a special waste after draining
Note: Volume of mixture in the tube corresponds to filling up to valve level.
Antifreeze can be prepared either by means of calcium chloride CaCl
2
or magnesium chloride MgCl
2
.
Quantity 0,40 kg CaCl
2
per 1 l of water safes tire up to temperature - 30°C (0,3 kg /l safes tire up to temperature - 20°C, 0,2 kg /l
safes tire up to temperature - 15°C).
Quantity 0,55 kg MgCl
2
per 1 l of water safes tire up to temperature - 30°C.
PDF byl vytvoren zkusebnı verzı FinePrint pdfFactory http://www.fineprint.cz