121
HYDRAULIC WITH MECHANICAL CONTROL SYSTEM
F_02_H3 F_02_H4
INNER CIRCUIT CONTROL LEVER
Inner circuit control lever controls:
a - lifting the implement into transport
position (max. lifting)
b - height adjustment of three point
hitch with implements when selected
position control and height adjust-
ment of tillage depth when selected
draft or mixed control
c - setting so called floating position
when working with implement equip-
ped with its own supporting wheel.
CONTROL MODE SELECTION LEVER
Lever has three positions marked by P, M, and D:
P -
Position control - Implement attached in the three point hitch is automatically
maintained in the constant height (position) with regard to the tractor.
M -
Mix control - is a combination of position and draft control. This is suitable es-
pecially for tilling in soils with various resistance.
D -
Draft control - Implement attached in the three point hitch is automatically re-
adjusted depending upon the change of soil resistance.
To Next Page
Loading...
