158
BALLAST WEIGHTS
F_02_109 F226
VALVE FOR FILLING THE AIR TUBE
WITH A LIQUID
All the rear wheel air tubes are fitted with
valves, which – with the help of adapters
– make it possible to fill them with liq-
uids.
Filling the air tubes of the front
wheels and twin rear tires with
liquids is forbidden.
PROCEDURE OF FILLING THE TIRES WITH LIQUIDS
− After lifting the tractor, relief the tire and turn it with the valve up (A).
− Drain off the air from the air tube and unscrew the valve element.
− Screw on the water-filling adapter and apply the liquid supply hose. Fill the air tube
with the prescribed quantity of water. For filling both a gravity tank (B) or pressure
filling (C) may be used.
− Remove the hose and unscrew the water-filling adapter.
− Screw in the valve element and inflate the tire to the prescribed pressure (D).
− After the inflation, screw the protecting cap on the valve.
− In the same way proceed for filling the other tire.
To Next Page
Loading...
