172
HINTS FOR MAINTENANCE
F_02_141 F_02_114 F_02_123
6 - Unscrew the tank enclosure.
7 - Replace the filtering cartridge
8 - Re-mount the new cartridge.
9 - Uncouple the two hoses from the
service cylinder and – together with
the discharge hose – put their ends
into the old-oil collecting vessel.
10 - Start the engine and – at idle speed
– (for max. 10 sec.) – turn the
steering wheel 2 or 3 times, to both
limit positions for expelling oil from
the steering unit and piping.
11 - Ensure the tractor against sponta-
neous move and lift the front axle.
12 - Place a vessel for collecting oil be-
neath the service cylinder and – by
turning the wheels (manually) – ex-
pel oil from the service cylinder.
13 - Re-couple all uncoupled joints.
14 - Fill the tank with oil and bleed the
circuit of the hydrostatic steering.
To Next Page
Loading...
