18
PREVENTIVE DAILY MAINTENANCE
F18 F_02_100 F_02_7
ATTACHING IMPLEMENTS
Check the tractor and trailer attaching
and suspending implements for proper
conditions
AFTER OPERATION WITH FRONT
IMPLEMENTS
After operation with front implements:
- Check the connections of hydraulic
control circuit of the front three-point
hitch for leaks
Clogging of coolers:
- Remove the side part of hood
- ∗Loosen and pull the air-conditioning
condenser to the left-hand tractor side.
- Clean the front part of engine radiator
(air-conditioning condenser) by means
of pressured air (blow air in direction
from the engine).
- Remove the rest of impurities from the
space under the bonnet (otherwise their
repeated suction might appear).
TIRES AND WHEELS
Check the front and rear wheel tyres for
proper pressure with adjusting it to the
foreseen operation. Check and tighten if
necessary the bolts of the front and rear
wheels (rim / wheel disk and wheel disk /
wheel axle connections).
Never drive the machine with the
bolts not fully tightened. l!
To Next Page
Loading...
