98
TRANSPORT APPLICATION
ADMISSIBLE LOAD ON THE HITCH FOR SINGLE-AXLE TRAILER IF THE Z 8641 - Z 11741 TRACTORS.
The values stated below hold for the tractors with additional weight applied to the front axle wheels in accordance with table,
without any weight applied to the rear wheels, with the maximum admissible load on the rear axle, and the wheel spacing equal
to 1725 mm.
Speed
(km/h)
Tire
G
z dov
(kg)
F
(kN)
Tractor type Tractor outfit
18,4-38 6800 30
Z 8641, Z 9641,
Z 10641, Z 11441,
Z 11741
Front bottom weights (2 units) = 68 kg
Weights ahead of the grill (5+5) = 500 kg
with no weight at the rear wheels
18,4-38 6800 30
Z 8641, Z 9641,
Z 10641, Z 11441,
Z 11741
Front three point hitch + weights (16 units) = 456 kg
front P.T.O. shaft
with no weights at the rear wheel
8
18,4-38 6800 30 Z 11741
Front bottom weights (2 units) = 68 kg
Weights ahead of the grill (7+7) = 700 kg
with no weights at the rear wheel
18,4-38 5500 25
Z 8641, Z 9641,
Z 10641, Z 11441,
Z 11741
Front bottom weights (2 units) = 68 kg
Weights ahead of the grill (5+5) = 500 kg
with no weight at the rear wheels
18,4-38 5500 25
Z 8641, Z 9641,
Z 10641, Z 11441,
Z 11741
Front three point hitch + weights (16 units) = 456 kg
front P.T.O. shaft
with no weights at the rear wheel
20
30
40
18,4-38 5500 25 Z 11741
Front bottom weights (2 units) = 68 kg
Weights ahead of the grill (7+7) = 700 kg
with no weights at the rear wheel
G
z adm
(kg) = Maximum admissible weight on the rear axle
F (kN) = Admissible vertical static load on the hitch for single-axle trailer
To Next Page
Loading...
