Zetor 6341 SUPER - Page 219

218
MAIN TECHNICAL PARAMETERS (at tractor shipping weight)
FORCE, POWER, CONSUMPTION Z 5321 Z 5341 Z 6321 Z 6341
Forces (kN)
tolerance ° 5%
Max. pulling force in swinging draw bar, on concrete,
tractor shipping weight with ballast weight, slippage
15%:
with cab
without cab
27,11
24,91
32,60
30,30
27,22
25,02
33,17
30,88
Max. pulling force in pick up hitch, tractor shipping
weight with ballast weight, and water in rear tire:
with cab
without cab
30,79
28,60
36,42
34,12
30,90
28,70
37,91
35,62
Lifting force in lower draft link balls of three point hitch
within the whole range at 90% max. pressure:
without lift assisting cylinder (kN)
with one lift assisting cylinder (kN)
with two lift assisting cylinders (kN)
-
28
36
-
28
36
-
28
36
-
28
36
Lifting force in lower draft link balls of three point hitch
within the whole range at max. pressure:
without lift assisting cylinder (kN)
with one lift assisting cylinder (kN)
with two lift assisting cylinders (kN)
-
31,0
39,9
-
31,0
39,9
-
31,0
39,9
-
31,0
39,9
Max. lifting force in lower draft link balls of three point
hitch at max. pressure:
without lift assisting cylinder (kN)
with one lift assisting cylinder (kN)
with two lift assisting cylinders (kN)
-
33,8
43,5
-
33,8
43,5
-
33,8
43,5
-
33,8
43,5
Power and consumption (kW, g.kW
-1
.h
-1
)
PTO power at engine rated speed and shifted 540
PTO RPM 43 (41,28) 43 (41,28) 46,8 (44,9) 46,8 (44,9)
Specific fuel consumption at above mentioned power 267,3 267,3 268,9 266,9
Power and consumption is taken after 100 hour running in. Value in brackets is valid for engine without running in and is for
information only.
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz