137
HITCHES
„F 196
F 197
Both stabilizers must always be assembled on the tractor. Both must be set
by the same way with the same position of pins either both blocked or both
unblocked. Do not adjust the rear wheel tread less than 1500 mm when
working with implement of category II that needs the side swing (for example
plough), avoid collision of lower links with tires. Lower draft links have to be
connected by springs and the top link hooked in the spring holder when
transporting without implement.
TELESCOPIC LOWER DRAFT LINKS
Telescopic lower links make attaching
the implement easy. Telescopic draft link
ends (2) are loosened after pushing the
latches (1) down. Slipped out draft link
ends are fitted onto both pins of
implement and are locked by quick lock
pins (3). Pins are located in holder on
telescopic link - (A). Draft link ends are
slid into draft links after reverse
movement and are automatically locked
in working position - (B).
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
