158
FILLING LIQUID INTO TIRES
F 225 F 226
VALVE FOR FILLING TIRES WITH
LIQUID
All rear wheel tubes are equipped with
valve that enables filling tires with liquid
when the adapter is used.
Filling of front tires and rear tires
double assembly with liquid is not
allowed.
FILLING THE LIQUID INTO TIRES
-
Unload the tire by lifting the tractor and turn it with the valve upward (A).
- Deflate the tube and remove the valve insert.
- Thread the adapter for filling the tires with water and slide the water hose over
adapter. Fill the tube with prescribed quantity of liquid. The tank (B) or pressure
water(C) can be used for filling the tire.
- Remove the water hose and adapter.
- Thread the valve insert and inflate tire into prescribed inflation pressure (D).
- Thread the valve dust cap after inflation.
- Fill the second tire by the same way.
PDF byl vytvoren zkusebnı verzı FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
