210
ELECTRICAL INSTALLATION
F 302 F 303
CHECKING THE ADJUSTMENT OF FRONT MASK HEADLIGHTS
Tractor must stand on horizontal ground and tires must be inflated to the specific
pressure when checking on a testing wall. Basic vertical setting of grill headlights
with low beam is adjusted with - 3,5 % tolerance from basic setting (measured at
stopped tractor with shipping weight). Light beams must be parallel with tractor axis
in horizontal direction.
I
-
Distance between testing wall and tractor headlight (5 m).
h
- Height of headlight center above ground
∆h
- Inclination of headlight (-3,5 %) to distance of testing wall = 17,5 cm
α
- Raising the picture of asymmetric headlight (15%)
ADJUSTMENT OF FRONT GRILL
HEADLIGHTS
Adjust the light by means of both screws
(1) for vertical and horizontal direction
simultaneously - horizontally 2 ; verti-
cally +1 to -6 .
Each light is adjusted separately. Bulb is
exchanged from the rear part of para-
bola. Slide out or remove the battery
because of limited space.
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
