70
OPERATION
F 94 F 95 F 96
GEAR SHIFTING
Tractors are equipped with four speed
synchronized gearbox, three stage
power shift - Hi-
Lo (torque multiplier)
reversor, and two stage reduction gear.
Four-speed gearbox is shifted by the
main shifting lever with grip push buttons
intended for Hi-Lo control (1). Forward
and reverse speed is shifted by reversor
lever (2).
The fourth speed can not be
shifted when shifted reverse
speed (it is blocked).
REVERSOR LEVER
You select the tractor direction by
reversor shifting lever (forward, reverse).
F -
Forward speed (24 speeds)
A -
Neutral
R -
reverse speed (18 speeds)
There are 18 reverse gears available at
reversible gearbox, the reverse speeds
are approximately so fast as forward
speeds. Thatřs why take this well into
consideration and choose the suitable
reverse speed for the given character of
the operation.
Shift the reversor with depressed
clutch pedal and with stopped
tractor.
Shift the reverse lever into po-
sition R
SHIFTING THE ROAD AND REDUCED
SPEEDS
H -
Road speeds
N -
neutral
L -
Reduced speeds
Gear shifting of reduced speeds is the
same as shifting of road speeds.
Shifting lever of road - reduced
speeds can be shifted at stopped
tractor only.
PDF byl vytvoren zkusebnı verzı FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
