79
OPERATION
F 116 F 117 F 117a
CONTROL OF FRONT DRIVING AXLE
Front driving axle is engaged in basic
position (indicator lamp is “ON„). It is
disengaged by a switch on the
dashboard.
a -
Front axle is disengaged
b - Front axle is engaged
Front driving axle is engaged at stopped
tractor (stopped tractor, stopped engine).
At tractors with pin diff. lock of
front driving axle the differential
lock must not be locked when
driving on the road! Danger of
accident when turning!
DRIVING WITH ENGAGED FRONT
DRIVING AXLE
Use the front driving axle when
slipping the rear wheels and for
increasing the traction force.
Driving with engaged front diving
axle on the road and hard
surface causes an excessive
wear of front tires.
Permanent engagement of front driving
axle is possible if a front agriculture
machine or implement is attached to the
tractor. This is specified in operatorřs
manual of a particular machine.
Maximal allowed speed of tractor with
such attachment is 15 km/h.
FREE SPACE ROUND CARDAN
SHAFT
Ensure the free space minimally
10 mm round cardan shaft when
assembling aggregates or at-
taching implements. This space
must be round the whole length
of cardan shaft within any its
inclinations.
If this rule is not fixed, danger of
tractor damage or machine ac-
cident is possible!
PDF byl vytvoren zkusebnı verzı FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
