Most of operations of planned maintenance may be carried out by the driver or other user of the tractor. In
case you do not have sufficient technical equipment, let the difficult operations carried out by a specialised
repair shop.
All works, connected with cleaning, lubrication and adjustments of the tractor or coupled
mechanisms may only be carried out after stopping of the engine and other movable components
except checks of brakes, recharging and hydraulic system.
Opening the hood
To open the hood:
Unlock the hood by pushing, using a suitable tool (e.g.
a screwdriver), on the rod (1) in the direction of the arrow.
The rod is located in the hole on the left side of the hood.
Grasp the hood and lift it. Due to the gas struts, the hood
then opens automatically. The hood is locked in the lifted
position by these gas-liquid struts.
To close the hood:
Pull the hood down using the strap and snap it down until
the hood lock engages.
Do not use excessive force to close the front
hood as the filaments of headlight bulbs situated in
the front hood mi
ht
et dama
ed
FCL20S5042
To Next Page
Loading...
