Replacement of the transmission oil cleaner element with hydraulic pump suction filte
The oil cleaner is placed on the left side of the gearbox.
Before replacing the oil cleaner element, place
a suitable vessel for dripping oil under the tractor.
1. Unscrew the body of the cleaner (1)
2. Replace the filtration element
3. Reassemble the body of the cleaner
FHD20S5N059
Oil cleaner is placed on the left side of the gearbox. The
cleaner clogging is signalized by a control on dashboard
lighting up.
Before replacing the insertion of the oil cleaner,
lace a suitable vessel under the tractor for catchin
the dripping oil.
1. Unscrew the body of the cleaner (1)
2. Replace the insertion filter
3. Do the back assembly of the body of the cleaner
FHD20S5N060
To Next Page
Loading...
