Filter installation instructions
Cleaning the heating filters
Perform the regeneration of the filters located under the covering grill over the windshield outside the cabin
according to the degree of clogging:
- by shaking
- by blowing them with compressed air
Check the filters for clogging daily. Replace heavily clogged filters.
1. Remove the old filter from the air duct orifice in the
place of its mounting.
2. Remove the protective package from the new filter.
3. Insert the filter into the air duct orifice in such a way to
make the air flow direction correspond to the flow direction
through the filter in accordance with the arrow on the filter.
The entering air must first pass through the white dust
filtration layer.
4. Check proper sealing of the filter.
5. Secure the filter.
FHD20S5N010
The tractor's safety cab is not equipped with
special air intake filters. It does not protect the
operator from the effects of aerosols and other
harmful substances.
C20N055
To Next Page
Loading...
