Fuse Panel (C)
Checking the adjustment of the front grill headlights
FHD20S5N053
During a check on a test wall the tractor must stand on a level surface and the tyres must be inflated to the
prescribed pressure. The basic vertical setting is 3.5% at the shipping weight of the tractor.In the horizontal
direction the light beams must be parallel with the longitudinal axis of symmetry of the tractor.
Pos. Fuse size Protected system
F40 5A Socket in the cab
F41 25A Three-pole socket on the right fender
F43 10A Driver's seat heating
F46 7.5A Socket in the cab
F47 10A Trailer braking system
F48 10A Trailer braking system
F49 5A Trailer braking system
F18N020
The glow fuse F54 is a strip type with the size of 80 A.
It is located in the right side of the engine and is
accessible when the engine bonnet is open.
FHSXS5N012
l - distance of the test wall from the headlight (5 m)
h - height of the headlight centre above the road surface
h
- headlight inclination (-3.5 %) to the distance of the test wall = 17.5
cm
- raising of the outline of an asymmetrical headlight (15%)
To Next Page
Loading...
